Elation PLATINUM SPOT 5R PRO User Manual page 30

is turned off or begins receiving a new DMX signal. If the fixture is turned on without
any DMX signal, the fixture will automatically go in to sound-active mode. Available
settings are: "Close" – Shutter flags will close. "Hold" – Fixture will remain at it's last
settings. "Auto" – Fixture will go into stand-alone mode, running the built-in program.
"Music" – The fixture will go into sound-active mode.
Pan Reverse - This function allows you to invert all pan movements. Use the Up
and Down buttons to turn this function On or Off. Press the Enter button to accept
the change or the Mode button to cancel and return to the main menu. This function
is "OFF" by default.
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On or Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu. This function is
"OFF" by default.
Pan Degree – This function changes the maximum Pan resolution from either 540˚
or 630˚. The default function is 540˚. 630˚ operation allows for greater coverage, but
slower pan movement.
Feedback – This function turns the feedback correction on or off. This function is set
to "ON" as default. This function allows for automatic pan and tilt correction in the
event either one disrupted during normal operation.
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. Use this function intergrading Platinum Spot 5R Pro into lighting rigs that
includes original Design Spot 250s. There are 3 different mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother,
more precise movements.
Speed 2:Pan and Tilt speeds are identical to the first generation Design Spot
250.
Speed 3:includes a faster Pan speed. Pan speed is 0.5 seconds faster than
original DS-250. Tilt speed will be the same as speed 2.
©Elation Professional, Los Angeles, Ca 30 www.ElationLighting.com
Platinum Spot 5R Pro™