Toshiba 42L6200U User Manual page 33

❖
Dual-wand IR blaster cable (see
on page
❖
Other cables as required to connect the device(s) to the TV (see
"Overview of cable types" on page
See the remote IR blaster setup section.
To connect the IR blaster cable:
1 Locate the infrared sensor on the front of your device. This
sensor is marked on some devices.If you are having issues
locating the device's infrared sensor, see
the device's infrared sensor:" on page
2 Align one of the IR blaster cable's wands approximately 1 inch
away from the infrared sensor on the front of the device and
attach it using double-sided mounting tape. If you have a
second device, attach the second wand in a similar manner.
NOTE
If you do not have a second device, coil the second wand with a
rubber band and leave it behind the TV.
3 Plug the IR blaster cable's plug into the TV's IR Blaster Out
terminal.
Front of IR-controlled DVD player (for example)
Front of IR-controlled audio device (for example)
Infrared
sensor
IR blaster cable wand
(approx.1 inch from device)
(Sample Illustration) L6200U/L7200U Series—Using the IR blaster
OUT terminal
Connecting remote IR devices
29)
TV back panel
Connecting Your TV
"Dual-wand IR blaster cable"
27)
"If you cannot locate
34.
Dual-
wand IR
blaster
cable
33