Transmitter Configurations; Standard Configuration - Directed Electronics AM5 Installation Manual

Confirmation honks off
Ignition lock and unlock on (if installed)
Passive locking (if programmed on)
Ignition domelight on
Security features on
Valet ® mode disabled
The dealer default settings only affect the settings listed above. The remaining features
control outputs of the system that must be programmed to meet the needs of the instal-
lation. Once the vehicle is delivered to the end user, the customer transmitter should
be programmed to the system. This will delete the master dealer remote and return the
security system to normal operation. The system will then operate according to how
the operating settings have been preset. It is also possible to reprogram the operating
settings by following the feature programming section of this guide.

transmitter configurations

The transmitters can be programmed with the standard or single button arm/disarm
configurations by using the Auto Learn functions in the Transmitter/Receiver Learn
Routine.

standard configuration

A remote that uses the standard configuration operates similarly to many factory key-
less entry remotes. A standard configuration transmitter allows arming, disarming,
and Panic Mode activation with separate buttons. When programmed for standard
configuration, the transmitter buttons are assigned to the following functions:
operates Arm only
operates Disarm only
28
© 2003 directed electronics, inc.