Master Dealer Remotes - Directed Electronics AM5 Installation Manual

4. Release. Once the code is learned, the integrated LED/Valet
released.
Channel Number Function
1 Auto learn standard
configuration
2 Arm/Disarm/Panic
3 Channel 2
4 Channel 3
5 Channel 4
6 Arm only
7 Disarm only
8 Panic only
9 Delete all transmitters

master dealer remotes

A master dealer remote can be programmed into the system for demonstration pur-
poses. Generally, each salesman would carry a remote that would operate all the cars
on the lot equipped with this system. The dealer remotes are binary transmitters that
are detuned slightly in order to limit transmitting range. The dealer remote can be
taught to the system by following the Transmitter Learn Routine.
When installing the system, it is possible to preset all of the operation settings using
the master dealer remote. However, when the system is operated using the master
dealer remote, a special set of dealer default settings are followed. The dealer default
settings are used to ensure that every vehicle equipped with this system is protected at
all times. Only the settings listed below are affected. When using a master dealer
remote, the system operates as follows:
Passive arming
© 2003 directed electronics, inc.
® switch can be
Wire Color
WHITE/BLUE
VIOLET/BLACK
27