Features #2 Menu; Transmitter Learn Routine - Directed Electronics AM5 Installation Manual

features #2 menu

Default settings are shown in bold.
Feature
Lock Button (one chirp)
Step
1 Ignition-Controlled Locking ON
2 Ignition-Controlled UnLocking ON Ignition-Controlled Unlocking OFF
3 Active Locking
4 Door Lock Pulse Duration–0.8 sec. Door Lock Pulse Duration–3.5 sec.
5 Single Unlock Pulse
6 Channel 3: Validity
7 Code Hopping ON

transmitter learn routine

1. Key. Turn the key to the ON position.
2. Choose. Within 5 seconds, press and release the integrated LED/Valet
number of times corresponding to the desired channel listed below. Once you
have selected the channel, press the switch once more and HOLD it. The LED will
flash and the horn will honk ( if connected) to confirm the selected channel. Do not
release the integrated LED/Valet
3. Transmit. While holding the integrated LED/Valet
the transmitter that you wish to assign to the selected channel. The unit will chirp
indicating successful programming. It is not possible to teach a transmitter button
to the system more than once.
26
Unlock Button (two chirps)
Ignition-Controlled Locking OFF
Passive Locking
Double Unlock Pulse
Channel 3: Second Unlock
Code Hopping OFF
switch.
®
switch, press the button from
®
© 2003 directed electronics, inc.
switch the
®