Installing The Dvd Player; Connecting The Optional Wireless Receiving Amplifier - Samsung HT-XQ100W Instruction Manual

Installing the DVD player

1
Separate the rear cover(A).
2
Remove the 1 screw of the cover(B).
3
Put the speaker cable connected to the
Speaker OUT port into the left groove.
Put the cables connected to the Video OUT,
4
Component OUT and Audio IN ports into
the right groove.
5
Fasten the 1 screw on the cover(B).
6
Close the rear cover(A).
15
cover(A)
cover(B)
1
2
3
4

Connecting the optional Wireless Receiving Amplifier

To connect the rear speakers wirelessly, you have to additionally purchase the wireless receiving module and
TX card from your Samsung retailer.
Rear Speaker (L)
WIRELESS RECEIVER MODULE
Connect the front, center and
subwoofer speakers, referring to page 12.
Insert the TX card into the TX card
connection port on the back of the
main unit.
•
The TX card enables communication between the
main unit and the wireless receiver.
Connect the left and right rear
speakers to the wireless receiving
module.
Plug the power cord of the wireless
receiving module in the wall outlet and
switch the power switch 'ON'.
Caution
•
Do not insert a card other than the TX card dedicated for the product. The product might be damaged or it may not be removed easily.
•
Do not insert the TX card upside down or in reverse direction.
•
Insert the TX card when the main unit is turned off.Inserting the card when it is turned on may cause a problem.
•
If the TX Card is inserted in the main unit, the rear speakers don't output sounds.
Center Speaker
Front Speaker (R)
Front Speaker (L)
Subwoofer
Rear Speaker (R)
Slanted side faces
TX CARD
16
GB