Installing DVD player
You can select and install either the Vertical or Horizontal Stand, depending on your preference.
Vertical Stand (supplied)
1
Fix the round support and Vertical
Stand with screws 3EA.
Open the cover on the rear of Vertical
2
Stand and connect the Audio/Video
cable into the Vertical Stand.
(See pages 19~24 for how to connect the cable.)
Locate the two indentations on the bottom
3
of the Main unit. Slide the Main unit onto
the two matching dowels on Vertical Stand.
4
Fix the Vertical Stand and the main
unit with screws 4EA.
Horizontal Stand (supplied)
Locate the two indentations on the side
1
of the main unit and slide onto the two
matching dowels on Horizontal Stand.
2
Fix the Horizontal Stand and the
main unit with screws 2EA.
15
Main unit
3
Vertical Stand
Round support
1
Main unit
Horizontal Stand
REAR OF MAIN UNIT
4
2
REAR OF
VERTICAL STAND