Backlight - Samsung SOC-4120AN Instruction Manual

Operating Your Camera
5. Select the position at which the CAMERA ID will be located on the screen.
Move the cursor to 'POS' and press SET button.
CAMERA ID
POS CLR RESET END
The CAMERA ID is displayed on the bottom-left of the monitor screen.
(Default position)
FRONT DOOR
Select the position by using the 4-directional buttons, then press the SET
button to confirm the position.
FRONT DOOR
6. When completed, move the cursor to 'END' and press SET button.
20 20
COLOR CCD CAMERA COLOR CCD CAMERA User's Manual User's Manual

BACKLIGHT

SV-II DSP chip built-in provides intelligent light level control to overcome the
severe Backlight conditions.
1. Press the SET button to display the SETUP menu and move the arrow
indicator to 'BACKLIGHT' using the UP or DOWN button.
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
2. SET 'BACKLIGHT' to the desired mode using the LEFT or RIGHT button.
WDR: In case that bright and dark parts exist on the screen at the same time,
your camera allows you to see both parts clearly
BLC: When the image is in front of strong background lighting, your camera
allows you to get the clear image
OFF: Deactivation
WDR BLC
3. Press the 'SET' button.
• When 'WDR' is chosen, you can adjust the level.
WDR SET
LEVEL
PRESS SET TO RETURN
You can select the level from -4 to 4. WDR sensitivity is increased or decreased.
COLOR CCD CAMERA COLOR CCD CAMERA
OFF
WDR
W-ATW
OFF
OFF
0
21 21
User's Manual User's Manual