Table of Contents
Advertisement
Operating Your Camera
SSNR(Samsung Super Noise Reduction)
To reduce the noise on the screen.
1. Press the SET button to display the setup menu and move the arrow
indicator to 'SSNR' using the UP or DOWN button.
2. Set 'SSNR' to desired mode using the LEFT or RIGHT mode.
LOW: low reduction of the noise
MIDDLE: middle reduction of the noise
HIGH: high reduction of the noise
OFF: Deactivation
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
IRIS
SHUTTER
SENSE UP
GAIN
SSNR
SPECIAL
EXIT
Notes
• If you change the 'GAIN' menu from AGC-L to AGC-H, sensitivity is increased as well
as noise on the screen.
• Afterimage may appear with SSNR.
• If you select OFF on GAIN menu, SSNR doesn't operate.
• Incidental image will be displayed more obviously according to SSNR step from
LOW to HIGH.
30
COLOR CCD CAMERA
OFF
WDR
W-ATW
OFF
LEVEL
OFF
OFF
AGC-L
MIDDLE
User's Manual
SPECIAL
1.Press the SET button to display the setup menu and move the arrow
indicator to 'SPECIAL' using the UP or DOWN button.
2. Press the SET button.
COLOR : choose color or B/W mode electrically
- ON : color mode
- OFF : B/W mode
- AUTO1 : generally color mode, B/W mode in low luminance.
- AUTO2 : AUTO2 is identical with AUTO1 under SENSE UP : AUTO condition.
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and
EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes the
video signal between cameras without a synchronous generator.
The line-lock synchronization is only used in the areas of 60Hz
(NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronization
- OFF : External line-lock synchronization
· If you choose 'L/L', you can adjust the desired phase. Press the SET button.
-You can adjust the desired phase from 0 to 270.
LINE LOCK
PHASE : 225
PRESS SET TO RETURN
COLOR CCD CAMERA
31
User's Manual
Advertisement
Table of Contents
