Camera Id - Samsung SOC-4120AN Instruction Manual

Operating Your Camera
SETUP

CAMERA ID

Select the function using
the UP or DOWN button. BACKLIGHT
WHITE BAL.
MOTION DET.
IRIS
SHUTTER
SENSE UP
GAIN
SSNR
SPECIAL
EXIT
3. Change the status of the selected feature using the LEFT or RIGHT button.
4. When completed, move the arrow indicator to 'EXIT' and press the SET
button.
Notes
• For the mode with you can access submenu.
• You can access submenu using SET button.
CAMERA ID
If you enter a CAMERA ID, the name will be displayed in the screen monitor.
1. Press the SET button to display the SETUP menu and move the arrow
indicator to 'CAMERA ID' using the UP or DOWN button.
2. Set 'CAMERA ID' to 'ON' using the LEFT or RIGHT button.
Notes
• If the CAMERA ID feature is set to 'OFF', the name
will not displayed in the monitor.
18
COLOR CCD CAMERA
OFF Change the status using
WDR the LEFT or RIGHT button.
W-ATW
OFF
LEVEL
OFF
OFF
AGC-L
MIDDLE
SETUP
CAMERA ID OFF
BACKLIGHT WDR
WHITE BAL. W-ATW
MOTION DET. OFF
IRIS LEVEL
SHUTTER OFF
SENSE UP OFF
GAIN AGC-L
SSNR MIDDLE
SPECIAL
EXIT
User's Manual
3. Press SET button.
CANERA ID
POS CLR RESET END
4. You can enter up to 16 characters.
Move the cursor to character-enter location by using the LEFT or
RIGHT button.
Select the desired character by using UP or DOWN button.
•The factory defualt characters are A, B, ···, a, b, ···, ., -, ··· 0, 1···, 8, 9
CAMERA ID
POS CLR RESET END
Press the SET button to confirm the blinking character. The first
character is saved and the cursor in the bottom of the screen moves to
the next position.
,
Repeats steps and until you create the full name you want.
Notes
• If you make a mistake while entering name
Move the cursor to 'CLR', press 'SET' button.
After erasing the character from right to left, correct the character again.
COLOR CCD CAMERA
19
User's Manual