Sharp LC-65G5X Operation Manual page 9

Preparation
4
Attaching the clamp and bundling the cables with the clamp
Fix the system cables firmly to the Display as shown.
5
Fasten the cables with
the holder.
* If routing the cables on
the right side, use the
holder on the right.
6
Closing the terminal cover
8
Fit the band around system cables.
1 Pass the end of the
band through the
hole.
Cable clamp
Insert the cable clamp in the hole on the Display as shown.
2 Pull the band
toward you and
fasten to the tab.
* If routing the cables on the
right side, use the holder on
the right. You need to
reverse the direction of the
holder when routing the
cables on the right side.
Cables come out from
the small opening.