Sharp LC-65G5X Operation Manual page 69

Appendix
H B. When there is no appropriate table
• With the Display upright, remove the stand and attach the safety restraints.
1. Detach the stand.
Remove the screws securing the
stand and detach the edge covers.
2. Place the Display on a soft, thick cloth and have one person hold it so that it won't overturn. Then
attach the restraining bands to the detached stand.
Restraining band (supplied)
3. Reverse the procedure described in Step 1 to re-attach the stand to the Display.
4. As in Procedure "A", secure the stand to the floor or a platform using commercially available
screws.
NOTE
• The supplied safety restraints are used for preventing an accident caused by overturn of this product. SHARP cannot
compensate for damage or injury caused by the collapse of this product due to natural disasters or misuse of the safety
restraints.
68
Edge cover
1 Remove the screws securing the
speakers.
2 Remove the screws securing the
stand.
Stand Screw for band (supplied)
Remove the screws attached to the
stand, and then detach the stand
while leaning the Display slightly
toward the back.
Place the Display on
a soft, thick cloth
(ex. Blanket)