Displaying A Still Image; Displaying Slide Show; Setting Slide Show - Sharp LC-65G5X Operation Manual

Using memory card

Displaying a still image

1
Press CARD and the card mode screen
displays.
2
Press c/d to select "Still" and then press
ENTER.
3
Press a/b/c/d to select a file you want to
display, and then press ENTER.
• To display the files that are in the previous or
next page, select c/d on the index screen and
press ENTER.
• When viewing a still image, by pressing WIDE
the image size changes. Normal – Full.
This function does not work when displaying
the index screen.

Displaying slide show

1
Repeat steps 1 to 3 in Displaying a still
image.
• The operation panel displays.
CARD - STILL
2
Press a/b/c/d to select d, and then press
ENTER.
• Slide show starts.
• Operate slide show with the operation panel
on the screen.
• To turn off the operation panel, press CARD
on the remote control.
• Press F to pause the slideshow, and press H
to return to the index screen.
NOTE
• See page 36 for operation panel function.
• You cannot rotate the image during slide show. Stop slide
show to rotate the image.
38
Still Video
File 1 File 2 File 3
File 4 File 5 File 6
File 7 File 8 File 9
0001/0045 ORDER:NORMAL REPEAT:OFF
PREV.
SLIDE SHOW STOP

Setting Slide Show

You can adjust the interval, order and repeat settings.
1
Press CARD and the card mode screen
displays.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Card".
4
Press a/b to select "Still Setup", and then
press ENTER.
5
Press a/b to select "Slide Show Setup" and
then press ENTER.
Slide Show Setup
My Programme
Audio Select
Edit
6
Press a/b/c/d to select the desired slide
show setting, and then press ENTER.
Selected item
Interval
Order
Repeat
NEXT
Interval
Order Normal
Repeat On
Description
Set the frame interval for a slideshow.
Set the frame order for a slideshow. See
My Programme for details.
If set to "On", the slideshow will play again
after showing the last frame.
5 Sec.
Off