Audio/Video Cable (Av Cable) - Sony VRD-MC10 Operating Instructions Manual

Audio/video cable (AV cable)

1
Turn on the video device.
b Note
• For the camcorder, make sure that the AC adapter is connected to the AC power cord.
2
Operate the video device to start playback of video.
• Playback operation differs among video devices. For most camcorders, switch the power/mode button to playback,
PLAY/EDIT or VTR mode to play video or perform recording. Camcorders with multiple media require specifying
the media (HDD, "Memory Stick Duo," 8cm disc, or Built-in memory). For details, refer to the operating
instructions of your video device.
• The [A/V t DV OUT] setting on Handycam
3
Connect the video device to the DVDirect.
Use an audio/video cable (supplied), AV cable (not supplied) or S-video cable (not supplied) when
connecting a video device such as a VCR or DVR to the DVDirect.
z Hints
• The connectors on a video device differ depending on the device. Refer to the operating instructions for your device,
and use an appropriate cable.
• If your video device has an S-video connector, use an S-video cable for improved picture quality (compared to video
cable quality).
For audio/video cables:
34
To AUDIO/VIDEO OUT
connectors
Audio/video cable (supplied)
®
(DV/D8) must be set to [OFF] ([OFF] is the default setting).
AUDIO IN connectors
VIDEO IN connector