Rear Suspension Damping
Rebound Damping
The rebound damping adjuster is located at the
lower end of the shock absorber.
It has at least
positions. Turning the adjuster
16
one full turn advances the adjuster positions.
To avoid damage to the damping adjuster, do
not keep it in the full hard position.
To adjust to the standard position:
LEFT
SIDE
4
(1)
(1) rebound damping adjuster
(2) punch mark
(3) reference mark
1.
Turn the adjuster ( ) clockwise until it will
no longer turn (lightly seats). This is the full
hard position.
2.
Turn the adjuster counterclockwise
until the punch mark ( ) on the adjuster
aligns with the reference mark ( ) at the
lower end of the shock absorber.
Suspension
(2)
1
10
clicks
2
3
(cont'd)
Servicing Your Honda
(3)
105