Honda 2004 XR400R Owner's Manual page 113

Suspension
To install the removed parts:
1. Install the subframe. Tighten the three bolts
to the specified torque:
Subframe upper bolt ( ):
20 lbf·ft (26 N·m , 2.7 kgf·m)
Subframe lower side bolts ( ) ( ):
31 lbf·ft (42 N·m , 4.3 kgf·m)
If a torque wrench is not used for this
installation, see your Honda dealer as soon
as possible to verify proper assembly.
2. Connect the electrical connectors by
matching the cable colors.
3. Reinstall the band and the clip.
4. Tighten the air cleaner connecting tube
clamp and the rear brake fluid reservoir stay
mount bolt.
104
Servicing Your Honda
10
8 9
5. Install the muffler and tighten the bolts.
Be careful not to damage the packing
installed inside the muffler clamp.
Tighten to the specified torque:
Muffler clamp bolt ( ):
14 lbf·ft (20 N·m , 2.0 kgf·m)
Muffler bolt (lower) ( ):
24 lbf·ft (32 N·m , 3.3 kgf·m)
Muffler bolt (upper) ( ):
24 lbf·ft (32 N·m , 3.3 kgf·m)
If a torque wrench is not used for installation,
see your Honda dealer as soon as possible to
verify proper assembly.
6. Reinstall the side cover and seat.
2
3
4