Turning Off The Projector - Epson EMP-800 User Manual

Turning Off the Projector

Follow the procedure below to turn off the power of the projector.
Procedure
1 Turn off the power for the signal sources that are connected to
the projector.
Check that the power for all connected components has been tuned off.
2 Press the [Power] button on either
the remote control or the
projector's control panel.
The following confirmation message will
appear.
If you do not want to turn off the power, press any button except the
[Power] button.
If you do not press any button, the message will disappear automatically
after seven seconds. (The power will not turn off at this time.)
3 Press the [Power] button once
more.
The lamp unit will turn off and the
operation indicator will flash orange as the
cool-down period starts.
4 Check that the cool-down is
complete.
When cool-down is complete, the
operation indicator lights orange.
The cool-down period lasts for
approximately 2 minutes. (This varies
depending on factors such as the ambient
air temperature.)
Tip :
The projector buttons cannot be operated while the operation indicator is flashing
orange. Wait until it lights steadily.
Power
Help
A/V Mute
Computer/YCbCr Video
E-Zoom
Source
Menu Esc
Sync+
Tracking - Tracking +
A to
Projector Remote control
Operation indicator stops flashing
and lights orange
Power
Freeze
39