Rear - Epson EMP-800 User Manual

Part Names and Functions

Rear

• • • •
Audio Out port (P.34)
Outputs the audio signal being input to
the projector.
* If a stereo mini jack is connected here,
the sound stops coming out from the
projector's built-in speaker.
• • • •
Control (RS-232C) port (P.104)
Connects the projector to a computer
using an RS-232C cable.
• • • •
Mouse port (P.25)
Connects the projector to a computer
via the accessory PS/2 mouse cable
when using the remote control as a
wireless mouse.
• • • •
USB port (P.24, 26, 104)
Connects the projector to a
computer or USB equipment via
the accessory USB cable.
• • • •
Remote control receiver
(P.14)
Receives signals from
the remote control.
• • • •
Speaker
• • • •
Power inlet
(P.36)
Connects the
power cord.
• • • •
Rear adjustable foot (P.42)
Extend and retract to adjust the
horizontal projection angle. At the time
of purchase, there is packing attached to
the rear adjustable foot. Remove this
packing before using the projector.
• • • •
Remote port (P.100)
Connects an optional
remote control receiver to
the projector.
10
• • • •
S-Video port (P.30)
Inputs an S-Video signal to
the projector from other
video sources.
• • • •
Monitor Out port (P.28)
Outputs the projected analog video signal
from a computer to an external monitor.
This is not available for digital video signals
being input to the Computer 1 port or signals
from other video sources.
• • • •
Computer 2/Component Video port
(P.20)
Inputs analog video signals from a
computer and component video signals
from other video sources.
• • • •
Computer 1 port (P.21)
Inputs digital/analog RGB video
signals from a computer.
• • • •
Audio 1 port (P.24)
Inputs audio signals.
Connects using a stereo mini jack.
• • • •
Audio 2 port (P.24)
Inputs audio signals. Use the
accessory A/V cable for this
connection.
• • • •
Video port (P.29)
Inputs composite video signals to the
projector from other video sources.
Use the accessory A/V cable for this
connection.