Optional Accessories - Epson EMP-800 User Manual

Projector
Hide thumbs Also See for EMP-800:
Table of Contents

Advertisement

Optional Accessories

The following optional accessories are available for purchase if required. This
list of optional accessories is current as of June 2001. Details of accessories are
subject to change without notice.
Hard travel case
Soft carrying case
Use this case if you need to carry the projector by
hand.
Spare lamp
Use as a replacement for spent lamps.
Portable screen (50 inch)
A compact screen which can be carried easily.
60 inch screen
80 inch screen
Mac adapter set
Use to connect the projector to a Macintosh
computer when the accessory or optional
computer cables cannot be used because the
connector shapes are different.
Computer cable
(6 ft (1.8 m) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Use to connect the projector to a computer when
you would like to use UXGA display resolution.
Computer cable
(9.8 ft (3 m) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Computer cable
(65.6 ft (20 m) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Use this extension cable if the accessory
computer cable is too short.
Computer cable
(6 ft (1.8 m) - for mini D-Sub 15-pin/5BNC)
Use to connect the projector to a workstation.
* A special method of installation is required in order to suspend the projector from the ceiling. Please
contact the place of purchase if you would like to use this installation method.
100
ELPKS26
Digital video cable
(9.8 ft (3 m) - DVI-D male-male)
ELPKS27
DVI cable for connecting the projector to a
computer with a digital RGB output interface.
Digital video cable
ELPLP15
(9.8 ft (3 m) - for DVI-D/DFP 20-pin)
DFP cable for connecting the projector to a
ELPSC06
computer with a digital RGB output interface.
DVI analog cable
ELPSC07
(9.8 ft (3 m) - for DVI-I/mini D-Sub 15-pin)
Use to connect the projector to connect two
ELPSC08
computers with analog RGB output to the
ELPAP01
projector.
Component video cable
(9.8 ft (3 m) - for mini D-Sub 15-pin/RCA x 3)
Use to connect a component video source.
ELPKC02
Remote control receiver
Use to control the projector with the remote
control from a distance.
Ceiling mount *
Use when installing the projector to a ceiling.
ELPKC09
Ceiling plate *
Pipe 370 (14.57 inches (370 mm)/silver)*
ELPKC10
Pipe 570 (22.44 inches (570 mm)/silver)*
Pipe 770 (30.31 inches (770 mm)/silver)*
Use when installing the projector to a high ceiling
ELPKC11
or a ceiling with veneer panels.
Image presentation camera
Use when projecting books, OHP films and
slides.
ELPKC20
ELPKC21
ELPKC25
ELPKC19
ELPST04
ELPMB07
ELPFC03
ELPFP04
ELPFP05
ELPFP06
ELPDC02
ELPDC03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emp-810Emp-600

Table of Contents