Sony DSR-50P Operating Instructions Manual page 37

To video equipment without a DV jack (when using the DSR-50/50P as a recorder)
Player
You can connect this unit to video equipment without a DV jack. Use this
unit as a recorder as follows.
to the S-video output
connector
to the video output
connector
to the audio output
connector
S-video cable (not supplied)
75 Ω coaxial cable (not supplied)
Audio cable (XLR) (not supplied)
Connect one of the followings as a video cable; S-video cable or 75 Ω
coaxial cable.
Notes
• When recording analog input signals, this unit can digitally output
signals from the DV IN/OUT connector for backup. Set the DV EE OUT
on the VTR SET menu to ON.
• If you connect the output connectors of this VCR to the input connectors
of the player, a humming noise may be generated or the image may be
distorted.
• Distorted signals (e.g., when played back at a speed other than normal)
will not be recorded properly.
DSR-50/50P (Recorder) (right panel)
: Signal flow
37
Chapter 2 Preparations (GB)