Storing And Reading System Settings In/From System Bank - Sony SRW-5000 Installation Manual

(7) Press the [F8] (LTC OUT) key several times to set the
LTC output phase (LINE or FC).
LINE: Outputs in the same phase as the main line.
FC: Outputs in the same phase as FC output.
OTHERS CHECK
NVRAM
F1
CTL
PHASE SETTING
HD SDI
F2 HD SDI OUTPUT ADV.
OUT
SD SDI OUTPUT ADV.
AUDIO PB OUTPUT ADV. : -1FRAME
SD SDI
AUDIO INPUT DELAY
F3
OUT
TC INPUT DELAY
AES/EBU &
ANALOG OUTPUT
AU PB
LTC OUTPUT
OUT
F4
AUDIO
TC AES/AN
DIAG
INPUT INPUT OUT
ALT F5 F6 F7
3. Storing the settings
(1) Press the [F1] (NVRAM CTL) key.
(2) Select "SAVE ALL DATA" using the [(]/[)] keys,
and press the [F10] (EXIT) key.
. The changed data is written in the NV-RAM, and
the menu returns to the PHASE SET menu.
. Or select either of the following items, and then
press the [F10] (EXIT) key.
NO OPERATION:
ALL DATA PREVIOUS: To return the data to the
RESET ALL DATA:
OTHERS CHECK
F1
NVRAM CONTROL
F2
F3
F4
DIAG
F5
ALT F6 F7
(3) Press the [F10] (EXIT) key several times to return to
the HOME menu.
1-30
: -90H
: -2H
: +1FRAME
: +1FRAME
: LINE
: LINE
LTC EXIT
OUT
F8 F9 F10
Changed data is not saved.
previous data.
To reset the NV-RAM to
the factory setting.
NO OPERATION
SAVE ALL DATA
ALL DATA PREVIOUS
RESET ALL DATA
EXIT
F10
F8 F9
1-11-6. Storing and Reading System Settings
in/from System Bank
Up to eight current system settings made by the SYSTEM
menu, META DATA SETUP menu, and PHASE SET
menu can be saved in the system bank of the unit with
respective titles. The settings can also be read from the
system bank as current settings.
The SYSTEM BANK menu is available for storing and
reading system settings in/from the system bank.
The settings saved in the system bank can also be stored in
a Memory Stick with the SYSTEM CARD BANK menu,
and read from the Memory Stick.
For titling the system bank, refer to Section 1-11-8.
For storing/reading the data saved in the system bank in/
from a Memory Stick, refer to Section 1-11-7.
n
SYSTEM BANK and SYSTEM CARD BANK menus are
available to store/copy data, but are not available to update
system settings.
1. System settings
Perform system settings using the SYSTEM menu, META
DATA SETUP menu, and PHASE SET menu referring to
the following.
. SYSTEM menu:
. META DATA SETUP menu:
. PHASE SET menu:
Section 1-11-1 (SRW-5000)
Section 1-11-2 (SRW-5500)
Section 1-11-4
Section 1-11-5
SRW-5000/5500