Bosch Integral TH13 Operating Instructions Manual page 61

You can store call numbers directly under a destination key. This can be accom-
plished in two ways.
Storing a call number in your telephone book on a destination key
Allocation: Telephonebook entry only
Destination 1 to 64
Assign
Store
Yes
Setting up the telephone for your own specific needs
Storing call numbers in the telephone book "
S S S
Enter the new call number or open the de-
sired entry in your telephone book.
Select the menu item "Allocation". The de-
fault is "Telephone book entry only". You
can now decide which attribute is to be al-
located to the call number.
Select "Destination 1 to 64" to store the call
number on a destination key.
Change the destination key level, if neces-
if req.
sary. You may only select level 1, 3, 4 or 5,
as level 2 is reserved for functions.
Press the destination key this number is to
be assigned to.
Note:
If the destination key has already been pro-
grammed, the previous contents will be
overwritten when the new number is
saved. The previous number is then stored
as a "Telephone book entry only".
Confirm your selection using "Assign".
Scroll downwards until "Store" appears in
the display.
Save the entry. The number is now stored
on the selected destination key.
61