Bosch Integral TH13 Operating Instructions Manual page 117

Cost per unit charge
Enter the current cost per unit charge.
Cut-in
The dialed number is busy. This function can be used to cut in on the cur-
rent call to pass on important information. (Only possible on phones within
one system. This function must be enabled by your BOSCH TELECOM
service representative.)
D
Data bits for AT command
Here you can set the character format for the control of your telephone.
The settings „7 Bit" and „8 Bit" are available.
This option only appears if you have set the AEI operating mode to "AT
command".
Delayed redial
If the line is busy, you can have the number automatically redialed after a
few seconds.
Delete
– The highlighted entry is deleted.
– Display a list of all messages you wish to delete.
The menu item "Delete" only deletes selected messages.
– To delete a programmed call diversion entry.
Delete all entries
– Used to delete all entries in the redial memory.
– All entries in the call list are deleted simultaneously.
Warning:
All entries are deleted immediately when this function is selected. Press the
"Release" key if you do not want this to happen.
Delete appointment
Delete an appointment.
Delete counter
Resets the charge counter.
Delete entry
The selected entry is deleted. You cannot delete partner entries.
If in doubt, look it up
Menu items on the display "
117