Oil Recommendation
type
viscosity
(weight)
Checking & Adding Oil
Refer to
Saf ety Precautions
LEFT REAR
(1)
(1) oil filler cap
(2) oil filler inspection hole
hypoid gear oil
SAE 80
on page
60
.
(2)
Final Drive Oil
1.
Place the motorcycle on its side stand
on a firm, level surface.
2.
Remove the oil filler cap ( ).
3.
Check the oil level. It should be flush
with the lower edge of the oil filler
inspection hole ( ).
2
4.
If the level is low, check for leaks. Add
the recommended oil through the oil
filler inspection hole until it reaches the
lower edge of the opening.
5.
Install the oil filler cap and tighten to
Install the oil filler cap and tighten to
the specified torque:
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
Servicing Your Honda
1
101