Custom Paper Type; Custom Type (1 - 8); Fuser Temperature Control; Duplex Printing On/Off - Oce OP30C Operation Manual

2. Printer Settings
Item No.

Custom type (1 - 8)

85
Sets the paper thickness, fuser temperature
control and duplex print out for the custom
types 1 - 8 selected under the "Bypass
paper type" setting (Item No.: 80).
Paper weight
86
Sets the paper weight (thickness) for custom
types 1 - 8.

Fuser temperature control

87
Sets the fuser temperature control for
custom types 1 - 8.

Duplex printing ON/OFF

88
Sets whether to use duplex print out or not
for custom types 1 - 8.

Reset custom paper type settings

89
Resets the items set under the "Custom
types (1 - 8)" setting (Item No.: 85) to their
factory default settings.
Color mode selection (color/black and
90
white print out)
Allows you to select whether printing will be
carried out in black and white or in color.

RGB simulation

91
If "sRGB" is selected here, printing will be
accomplished in colors relatively close to the
colors that are shown on the computer
monitor.
Ink (CMYK) simulation
92
This setting is only valid when "KPDL" or
"KPDL (Auto)" is selected as the emulation
protocol.
Item Display message
Select Paper Type
Default Paper Type
(COLOUR MODE)
Available settings
Custom 1- 8
(TYPE ADJUST)
Paper Weight Normal,
Heavy (Thick),
Extra heavy
Fuser Mode Low, Middle
Duplex Path Enable, Disable
OK
(REST TYPE
ADJUST)
Color Mode Monochrome(B/W),
Color(COLOUR)
RGB Simulation None, sRGB

Ink Simulation

None, SWOP, Euro
scale
2-16
Remarks