Specifications - Roland V-Drums TD-12KX Owner's Manual

Bell Shot
This playing method involves striking the bell. It corresponds
to the sound of the "rim-side" of the connected trigger input.
* Bell shots are possible when the connection is made to the
BOW/BELL output.
* Strike the bell somewhat strongly with the shoulder of the
stick when playing bell shots.
Choking
Choking (pinching) the cymbal's edge with the hand
immediately after hitting the cymbal makes the sound stop.
Choke the location of the edge sensor shown in the figure. If
you choke an area where there is no sensor, the sound does
not stop.
Edge Sensor
Bell

Specifications

KD-120 (V-Kick)
Pad size: 12 inches
Dimensions: 490 (W) x 400 (D) x 500 (H) mm
19-5/16 (W) x 15-3/4 (D) x 19-11/16 (H) inches
Weight: 7.7 kg
17 lbs
Accessory: Beater
PD-105 (V-Pad)
Pad size: 10 inches
Triggers: 2 (Head, Rim)
Dimensions: 280 (W) x 360 (D) x 112 (H) mm
11-1/16 (W) x 14-3/16 (D) x 4-7/16 (H) inches
Weight: 2.3 kg
5 lbs 2 oz
PD-85 (V-Pad)
Pad size: 8 inches
Triggers: 2 (Head, Rim)
Dimensions: 245 (W) x 310 (D) x 95 (H) mm
9-11/16 (W) x 12-1/4 (D) x 3-3/4 (H) inches
Weight: 1.7 kg
3 lbs 12 oz
CY-12R/C (V-Cymbal Ride/Crash)
Pad size: 12 inches
Triggers: 3 (Bow, Bell, Edge)
Dimensions: 300 (W) x 300 (D) x 51 (H) mm
11-13/16 (W) x 11-13/16 (D) x 2-1/16 (H) inches
Weight: 1.1 kg
2 lbs 7 oz
Accessories: Stopper, Wing Nut, Felt Washer
962a
* In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change without
prior notice.
15