Roland V-Drums TD-12KX Owner's Manual page 13

Connecting the Pads and the Cymbals
Using the built-in connection cables of the MDS-12X, connect the pads, cymbals, hi-hat, and kick trigger pad.
921
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all
devices before making any connections.
fig.Setting1.e
TD-12 Rear Panel
AX2
HH
(TRIGGER OUT)
HHC
(CONTROL OUT)
TD-12
• The HI-HAT and RIDE cymbal use two cables each.
See the TD-12 Owner's Manual (p. 20 and p. 52).
• Adjust the VH-11's offset.
See the VH-11 Owner's Manual (p. 6).
* Do not pull or stretch the cables too tight.
* When connecting the cables, please refer to the marking
AX1 RDE RD CR2
CR1
(BOW/EDGE)
CY-12R/C CY-12R/C
VH-11 VH-11
labels that are attached to both ends of the cables.
CR1 HHC HH
T1
PD-85 PD-85
PD-105
SNR
KIK
KD-120
T3 T2 T1 SNR
RD
(BOW/BELL)
RDE
(BOW/EDGE)
CY-12R/C CY-12R/C CY-12R/C
T2
T3
PD-105
KIK
CR2
(BOW/EDGE)
CY-12R/C CY-12R/C
13