Table of Contents
Advertisement
Setup menu list (continued)
RECORD SETUP screen
Display
Item
REC FORMAT
CAMERA
(AVCHD mode
only)
REC FORMAT
CAMERA
(DV mode
only)
ASPECT CONV
CAMERA
(DV mode
only)
PREREC
CAMERA
MODE
TIME STAMP
CAMERA
INTERVAL REC CAMERA
1394 TC
DV IN
REGEN
TCG
CAMERA
DV IN
TC PRESET
CAMERA
DV IN
10
mode
Selects the recording format.
PH 1080/50i
PH 1080/25P
PH 720/50P
PH 720/25P
HA 1080/50i
HG 1080/50i
HE 1080/50i
•
You cannot change the format during interval recording.
Selects recording format
576/50i
576/25P
Selects the clip's aspect ratio.
SIDE CROP:
LETTER BOX: Records in 16:9 ratio. Adds black bars to the top and bottom edges.
SQUEEZE:
Sets PRE RECORDING to ON or OFF. (Pages 11, 60)
ON OFF
•
TCG is set to FREE RUN (AVCHD mode only).
•
Cannot be set during INTERVAL REC.
Specifies whether date and time information is superimposed over recorded
images.
ON:
Superimposes date and time information on the image.
OFF:
Does not superimpose date and time information on the image.
Enables frame-by-frame recording at specified intervals to create short videos of
scenes with slow movement over long periods of time.
Single frames are recorded at the specified interval, with 5 frames equaling 1
second of video in AVCHD mode and 30 frames per second in DV mode.
OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE, 2 MINUTES
•
Set the below values for REC FORMAT when setting INTERVAL REC. If the
settings differ to the below, INTERVAL REC will be displayed in gray and
disabled.
AVCHD mode
REC FORMAT: PH 1080/5P
DV mode
REC FORMAT: 576/50i
Sets the time code for recording.
ON:
Records the time code of the device connected to the DV terminal.
OFF:
Records the time code set with this camera.
•
When set to ON, TCG cannot be changed.
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode.
A slight time error may occur when switching to PB mode if the frame rate is set
to 5P.
REC RUN:
The time code is advanced only when recording.
Sets the initial time code.
YES
NO
•
Set the frame value to 0 or a multiple of 4 when you set recording frame rate
of recording format to 5P. If any other value is set, the recorded time code will
mis-match.
Description of settings
Records in 4:3 ratio. Crops the left and right edges.
Squeezes images horizontally from the left and right.
indicates the factory setting.
Advertisement
Table of Contents
