Table of Contents
Advertisement
Setup menu list (continued)
RECORD SETUP screen
Item
REC FORMAT
CAMERA
PREREC
CAMERA
MODE
TIME STAMP
CAMERA
INTERVAL REC CAMERA
TC MODE
CAMERA
TCG
CAMERA
TC PRESET
CAMERA
UB PRESET
CAMERA
: Can also be configured in Quick Menu. (Page 96)
10
Display
Q.MENU
mode
Selects the recording format.
PH 1080/60i
PH 1080/30P
PH 1080/24P
PH 720/60P
PH 720/30P
PH 720/24P
HA 1080/60i
HG 1080/60i
HE 1080/60i
•
PH 1080/4P and PH 70/4P represent native recording.
•
You cannot change the format during interval recording.
Sets PRE RECORDING to ON or OFF. (Page 46)
ON OFF
•
TCG is set to FREE RUN.
•
Cannot be set during INTERVAL REC.
Specifies whether date and time information is superimposed over
recorded images.
ON:
OFF:
Enables frame-by-frame recording at specified intervals to create short
videos of scenes with slow movement over long periods of time. Single
frames are recorded at the specified interval, with 4 frames equaling 1
second of video.
OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE,
2 MINUTES
•
When INTERVAL REC is enabled, the following setting items
automatically change as follows.
REC FORMAT: PH 1080/4P, TC MODE: NDF
Selects the correction mode of the internal time code generator when
the time code of the internal time code generator is recorded.
DF:
NDF:
•
TC MODE is automatically set to NDF when you set recording frame
rate of recording format to 4P.
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation
A slight time error may occur when switching to PB mode if the frame
rate is set to 4P.
REC RUN:
Sets the initial time code.
YES
•
Set the frame value to 0 or a multiple of 4 when you set recording
frame rate of recording format to 4P. If any other value is set, the
recorded time code will mis-match.
Sets the user information.
YES
Description of settings
Superimposes date and time information on the image.
Does not superimpose date and time information on the
image.
Uses the drop frame mode.
Uses the non-drop frame mode.
mode.
The time code is advanced only when recording.
NO
NO
indicates the factory setting.
Advertisement
Table of Contents
