Record Setup Screen - Panasonic AG-HMC80P Operating Instructions Manual

RECORD SETUP screen

Display
Item
mode
REC FORMAT CAMERA Selects the recording format.
(AVCHD mode PH 1080/60i
only) PH 1080/30P
PH 1080/24P
PH 720/60P
PH 720/30P
PH 720/24P
HA 1080/60i
HG 1080/60i
HE 1080/60i
• PH 1080/24P and PH 720/24P represent native recording.
• You cannot change the format during interval recording.
REC FORMAT CAMERA Selects recording format
(DV mode 480/60i
only) 480/30P
480/24P
ASPECT CONV CAMERA Selects the clip's aspect ratio.
(DV mode SIDE CROP: Records in 4:3 ratio. Crops the left and right edges.
only) LETTER BOX:
SQUEEZE:
PREREC CAMERA Sets PRE RECORDING to ON or OFF. (Pages 11, 60)
MODE ON OFF
• TCG is set to FREE RUN (AVCHD mode only).
• Cannot be set during INTERVAL REC.
TIME STAMP CAMERA Specifies whether date and time information is superimposed over recorded
images.
ON:
OFF:
INTERVAL REC CAMERA Enables frame-by-frame recording at specified intervals to create short videos of
scenes with slow movement over long periods of time.
Single frames are recorded at the specified interval, with 24 frames equaling 1
second of video in AVCHD mode and 30 frames per second in DV mode.
OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE, 2 MINUTES
• Set the below values for REC FORMAT when setting INTERVAL REC. If the
settings differ to the below, INTERVAL REC will be displayed in gray and
disabled.
AVCHD mode
REC FORMAT: PH 1080/24P
DV mode
REC FORMAT: 480/60i
1394 TC DV IN Sets the time code for recording.
REGEN ON:
OFF:
• When set to ON, TC MODE and TCG cannot be changed.
TC MODE CAMERA Selects the correction mode of the internal time code generator when the time
DV IN code of the internal time code generator is recorded.
DF:
NDF:
• TC MODE is automatically set to NDF when you set recording frame rate of
recording format to 24P (AVCHD only).
Description of settings
Squeezes images horizontally from the left and right.
Superimposes date and time information on the image.
Does not superimpose date and time information on the image.
Records the time code of the device connected to the DV terminal.
Records the time code set with this camera.
Uses the drop frame mode.
Uses the non-drop frame mode.
indicates the factory setting.
103