Table of Contents
Advertisement
Setup menu list
SCENE FILE screen
Display
Item
FILE SELECT
CAMERA
LOAD/SAVE/
CAMERA
INIT
DETAIL LEVEL
CAMERA
V DETAIL
CAMERA
LEVEL
DETAIL
CAMERA
CORING
CHROMA
CAMERA
LEVEL
CHROMA
CAMERA
PHASE
COLOR TEMP
CAMERA
MASTER PED
CAMERA
A.IRIS LEVEL
CAMERA
DRS
CAMERA
GAMMA
CAMERA
100
mode
Selects the scene file. Scene files can be saved individually in AVCHD mode and
DV mode.
SCENE1
SCENE2
Loads, saves, or initializes the scene file selected with FILE SELECT.
LOAD: Loads the scene file settings set on this camera.
SAVE:
Saves changed scene file settings.
INIT:
Returns current setting values to factory default settings.
NO:
Returns to the last screen.
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7...0...+ 7
Adjusts the level of outline correction in the vertical direction.
- 7...0...+ 7
Adjusts the level of noise reduction of the detail signal.
- 7...0...+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
Adjusts the chroma level.
- 7...0...+ 7
Makes fine adjustments to the chroma phase.
- 7...0...+ 7
Makes fine adjustments to the color temperature.
- 7...0...+ 7
•
Enabled when presets, Ach, or Bch are configured for white balance in manual mode.
Adjusts the master pedestal (black level of the image) as the basis for images.
- 15...0...+ 15
Sets the desired AUTO IRIS level.
- 10...0...+ 10
Selects the DRS (dynamic range stretcher) function.
It enables the dynamic range to be expanded by compressing the level of the
video signals in the high-brightness areas where overexposure results during
normal shooting.
OFF, 1, 2, 3
•
The higher the number of the setting, the higher the compression level of the
high-brightness areas.
Selects the gamma curves.
HD NORM: This gamma setting is suitable for HD shooting. Initial AVCHD
mode settings.
LOW:
Makes a mellow image using the gamma curve which has a gentle
incline in low-brightness curve. The contrast sharpens.
SD NORM: This is the normal video setting, carried over from the DVX100
series. Initial DV mode settings.
HIGH:
Expands the tone of dark parts and makes a brighter image using the
gamma curve which has a sharp incline in low-brightness curve. The
contrast softens.
B.PRESS:
Makes the contrast shaper than LOW.
CINE-LIKE D: Uses a gamma designed to create cinema-like images.
CINE-LIKE V: Uses a gamma designed to create cinema-like images with
emphasized contrast.
•
When you select CINE-LIKE gamma, we recommend setting the lens aperture
lower than normal image level (approximately 1/) for optimal results.
Description of settings
indicates the factory setting.
Advertisement
Table of Contents
