Panasonic AVCCAM AG-HMC81E Operating Instructions Manual page 107

Memory card camera-recorder
Hide thumbs Also See for AVCCAM AG-HMC81E:
Table of Contents

Advertisement

SW&DISP SETUP screen (continued)
Display
Item
mode
AUTO SW
CAMERA
PHOTO
SMOOTH
CAMERA
ZOOM STOP
PHOTO
CAM GAIN
CAMERA
LIMIT
PHOTO
FACE
CAMERA
FRAMING
PHOTO
ZEBRA
CAMERA
DETECT
PHOTO
MARKER
CAMERA
PHOTO
GUIDE LINES
PHOTO
HISTOGRAM
PHOTO
SAFETY ZONE
CAMERA
REC COUNTER CAMERA
DV IN
Sets the face detection function during auto mode to ON or OFF.
A
: Enables face detection.
O N
: Disables face detection.
A
OFF
Selects the method in which zoom operations are stopped.
ON:
Smooth stop.
OFF:
Precise stop.
Sets the maximum value for camera gain.
CAMERA mode
24 dB:
Camera gain can be set to up to 4 dB.
12 dB:
Camera gain can be set to up to 1 dB.
PHOTO mode
18 dB:
Camera gain can be set to up to 18 dB.
12 dB:
Camera gain can be set to up to 1 dB.
Sets the detection frame displays when
OFF:
Not displayed.
PRIMARY:
Displays only the primary frame.
ALL:
Displays all face detection frames.
Selects the brightness level of the left-leaning zebra patterns on the screen.
105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
Select ON to display the marker.
ON OFF
To display the marker, press the ZEBRA button.
Displays guide lines for confirming level shooting.
OFF,
,
,
Guide lines are not recorded on images.
Guide lines do not appear when the face detection function is set to ON.
Displays a graph with the horizontal axis representing brightness, and the vertical
axis representing number of pixels.
You can determine the exposure distribution of an entire image by viewing the
distribution in the graph.
ON OFF
Display example
Dark
Adjust the brightness by adjusting the aperture.
Sets SAFETY ZONE.
OFF, 90%, 4:3
Selects counter operation during recording.
TOTAL: The count continues to increase until the RESET button is pressed to
reset it.
CLIP:
Resets the counter at start of recording and counts the time of each
recording session.
Not displayed in PB mode.
Description of settings
A
is selected in auto mode.
O N
Standard
Light
indicates the factory setting.
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avccam ag-hmc81

Table of Contents