Sound Configuration Page - Garmin GDU 37X Installation Manual

4.4.6 SOUND Configuration Page

The SOUND Configuration Page allows setting the parameters for various alert and message tones.
1. In configuration mode, use the FMS Joystick to select the SOUND Page.
2. Use the FMS Joystick to select the desired configurable item and make the desired change. Then press
the ENT Key or use the FMS Joystick to select the next item. Press the FMS Joystick to move the
cursor to the page selection menu when finished.
The configuration options for the SOUND Configuration Page are listed/described as follows:
Alert Volume – Controls the volume level of audio alerts (settings: Off, 1-10)
Message Tones – Controls the volume level of message tones (settings: Off, 1-10)
Terrain Audio – Enables/disables terrain awareness audio alerts
TIS Audio – Enables/disables TIS traffic audio alerts
Alert Output – If set to MONO + STEREO, alert tones and messages will be output on both the mono and
stereo outputs. If set to MONO ONLY, alert tones and messages will be output only on the mono output.
GDU 37X Installation Manual
190-01054-01
Page 4-9
Revision C