Panasonic KX-TG6461NZ Operating Instructions Manual page 34

TG6461NZ(e).book Page 34 Friday, May 15, 2009 9:33 AM
Answering System
there are no new messages. If you call your phone
from outside to listen to new messages (page 32),
you know that there are no new messages when
the phone rings for the 3rd time. You can then hang
up without being charged for the call.
Y Handset
1
8 (middle soft key)
2
{V}/{^}: "Answer System" i M
3
{V}/{^}: "Settings" i M
4
{V}/{^}: "Number of Rings" i M
5
{V}/{^}: Select the desired setting. i M
i {ih}
For Telecom Call Minder or TelstraClear
Message Mailbox service subscribers
To receive Call Minder or Message Mailbox
messages and use the unit's answering system
properly, please note the following:
L "Call Minder" and "Message Mailbox" are
services provided by your service provider/
telephone company (page 35). You will need to
first subscribe or activate this service through
your service provider/telephone company.
Contact your service provider/telephone
company on how to operate this service and
how you will be notified that you have
messages. To use this service you will be
required to leave your answering machine off on
your unit (page 30). This will allow the service to
receive any messages. This unit has a visual
indicator (#) to indicate new messages. Your
service provider/telephone company also uses
a "Stutter" dial tone to indicate new messages.
L To use the unit's answering machine rather than
the service provided by your service provider/
telephone company, please contact your service
provider/telephone company to have it removed
or deactivated permanently or temporarily.
Alternatively you can leave this service
connected and change the "Number of
Rings" to a shorter duration on your unit so
your unit's answering machine can pick up the
call prior to the service provided by your service
provider/telephone company.
Note:
L This service can capture messages while the
user is on a dial-up Internet connection.
34
Caller's recording time
You can change the maximum message recording
time allotted to each caller. You can also select
"Greeting Only" which sets the unit to greet
callers but not record messages. The default
setting is "3 Minutes".
Y Handset
1
8 (middle soft key)
2
{V}/{^}: "Answer System" i M
3
{V}/{^}: "Settings" i M
4
{V}/{^}: "Recording Time" i M
5
{V}/{^}: Select the desired setting. i M
i {ih}
Note:
L When you select "Greeting Only":
– If you do not record your own message, the
unit will play the pre-recorded greeting-only
message asking callers to call again later.
– If you use your own message, record the
greeting-only message asking callers to call
again later (page 30).
L When "Greeting Only" is selected, d is
displayed on the base unit and handset.
Turning the call screening on/off
You can set the call screening feature "On" or
"Off". For details, see page 30. The default
setting is "On".
= Base unit
1
8 (middle soft key)
2
{V}/{^}: "Answer System" i M
3
{V}/{^}: "Call Screening" i M
4
{V}/{^}: Select the desired setting. i M
i {EXIT}
Y Handset
1
8 (middle soft key)
2
{V}/{^}: "Answer System" i M
3
{V}/{^}: "Settings" i M
4
{V}/{^}: "Call Screening" i M
5
{V}/{^}: Select the desired setting. i M
i {ih}