Panasonic KX-TG6461NZ Operating Instructions Manual page 25

TG6461NZ(e).book Page 25 Friday, May 15, 2009 9:33 AM
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want to
answer such as junk calls.
When a call is received, the unit does not ring while
the caller is being identified. If the phone number
matches an entry in the call barred list, the unit
sends out a busy tone to the caller, and then
disconnects the call.
Program this setting using either the base unit or
one of the handsets.
Important:
L When the unit receives a call from a number that
is stored in the call barred list, the call is logged
in the caller list (page 28) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call
barred list by using the caller list or by entering the
numbers directly.
Important:
L It is advised to store the phone number with an
area code in the call barred list.
= Base unit
■ From the caller list:
1
\ (right soft key)
2
{V}/{^}: Select the entry to be barred. i
8
3
{V}/{^}: "Add Bar List" i M
4
{EXIT}
■ By entering phone numbers:
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M i
~
3
Enter the phone number (24 digits max.).
i M
L To erase a digit, press ^.
4
{EXIT}
Y Handset
■ From the caller list:
1
8 (middle soft key)
2
{V}/{^}: "Caller List" i M
3
{V}/{^}: Select the entry to be barred. i
8
4
{V}/{^}: "Add Bar List" i M
5
{ih}
■ By entering phone numbers:
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M i
~
3
Enter the phone number (24 digits max.).
i M
L To erase a digit, press ^.
4
{ih}
Viewing/editing/erasing bar call numbers
= Base unit
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M
3
{V}/{^}: Select the desired entry.
L To exit, press {EXIT}.
4
Proceed with the desired operation.
■ Editing a number:
8 i {V}/{^}: "Edit" i M i Edit
the phone number. i M i {EXIT}
■ Erasing a number:
W i {V}/{^}: "Yes" i M i
{EXIT}
Y Handset
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M
3
{V}/{^}: Select the desired entry.
L To exit, press {ih}.
4
Proceed with the desired operation.
■ Editing a number:
8 i {V}/{^}: "Edit" i M i Edit
the phone number. i M i {ih}
■ Erasing a number:
W i {V}/{^}: "Yes" i M i
{ih}
Note for base unit and handset:
L When editing, press the desired dial key to add,
^ to erase.
Programming
25