Panasonic KX-TG6461NZ Operating Instructions Manual page 23

TG6461NZ(e).book Page 23 Friday, May 15, 2009 9:33 AM
Main menu
*1
Base Unit Setup
>
*1
Caller Barred
7
*1 If you program these settings using one of the handsets, you do not need to program the same item
using another unit.
*2 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
To use this feature, set the date and time first (page 13).
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring for outside calls.
However even when the ringer volume is set to off, the handset rings at the lowest level for alarm
(page 24) and intercom calls (page 36), and rings at the highest level for paging (page 36).
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when you
answer the call.
*5 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys,
including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller's information after lifting up the
handset to answer a call, turn off this feature.
*8 To prevent other users from joining your conversations with outside callers, turn this feature on.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
Sub-menu 1
*8
Privacy Mode
<Off>
*9
Recall/Flash
<600 msec.>
Area Code
Base Unit PIN
<0000>
Repeater
<Off>
–
Programming
Sub-menu 2
–
–
–
–
–
–
Page
–
16
24
24
26
25
23