Polycom Tools Commands - Polycom VSX Series Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

Polycom Tools Commands

Command Syntax
all register all register
Registers changes to any of the
following types of parameters:
• Current near-site or far-site source
• State of privacy
• Current volume level
• Active camera presets
• Status of point-to-point or multipoint
calls
• Status of physical ISDN/IP
connection to codec
• PIP state
• Visual Concert state
• Chair control
• System information
• Gatekeeper status
all all unregister
unregister
The following types of parameters are
unregistered:
• Current near-site or far-site source
• State of privacy
• Current volume level
• Active camera presets
• Status of point-to-point or multipoint
calls
• Status of physical ISDN/IP
connection to codec
• PIP state
• Visual Concert state
• Chair control
• System information
• Gatekeeper status
3 - 88
Description
Simultaneously registers all
user feedback so that the API
reports all user actions. This
command is particularly useful
when two different control sys-
tems are being used
simultaneously, such as the web
and API commands. The
system maintains the registra-
tion changes through restarts.
This command also returns all
current settings.
To unregister user feedback,
use the all unregister
command.
Note: The function and syntax
of all register and registerall
are identical.
Simultaneously unregisters all
registered user feedback so that
the API no longer reports
changes to the parameters
listed in the Syntax column.
Note: The function and syntax
of all unregister and unregis-
terall are identical.
www.polycom.com/videodocumentation
Example
all register
all unregister