Polycom VSX Series Integrator's Reference Manual page 80

Integrator's Reference Manual for the VSX Series
Command Syntax
camera left: Starts moving the camera to
(continued) the left.
right: Starts moving the camera
to the right.
up: Starts moving the camera up.
down: Starts moving the camera
down.
zoom-: Starts zooming out.
zoom+: Starts zooming in.
stop: Stops the camera motion in
progress.
• near <setposition|getposition>:
Sets or gets the x, y, and z
coordinates of the currently selected
PTZ camera. Camera PTZ range:
-880 <= x <= 880 (pan)
-300 <= y <= 300 (tilt)
0 <= z <= 1023 (zoom)
Note: Some D30 cameras might not
be able to reach the designed range
limit. For example, although the pan
limit is 880, the camera might only be
able to reach 860.
• stop: Stops the near or far camera
when in continuous mode.
• tracking: Tracking mode:
on: Turns on the far camera
tracking mode. The far-site
system must have the option Far
Control of Near Camera enabled
and auto-tracking turned on.
off: Turns off the far camera
tracking mode.
to_presets: Turns on the far
camera tracking to presets.
get: Returns the far camera
tracking mode.
cameradi- cameradirection
rection <normal|reversed|get>
Where:
• normal: Sets the direction of the
camera to normal.
• reversed: Sets the direction of the
camera to reversed.
• get: Returns the current setting
(normal or reversed).
3 - 40
Description
Selects whether the camera
moves in the same direction
(normal) as the arrows on the
remote control or in the opposite
(reversed) direction.
User interface screen location:
System > Admin Settings >
Cameras: Camera Direction
www.polycom.com/videodocumentation
Example
cameradirection
normal