Polycom VSX Series Integrator's Reference Manual page 148

Integrator's Reference Manual for the VSX Series
Command Syntax
allowdialing allowdialing <yes|no|get>
Where:
• yes: Allows users to place calls.
• no: Disables dialing so that the VSX
system can only receive calls.
• get: Returns the current setting (yes
or no).
allowus- allowusersetup <yes|no|get>
ersetup
Where:
• yes: Enables the User Settings icon.
• no: Disables the User Settings icon.
• get: Returns the current setting (yes
or no).
callencryp- callencryption
tion <required|disabled|get>
Where:
• required: Sets call encryption to be
used for every call when it is
available.
• disabled: Disables call encryption.
• get: Returns the current setting
(required or disabled).
confirm- confirmdiradd <yes|no|get>
diradd
Where:
• yes: When adding an entry to the
Directory (Address Book), the user
is prompted with the message "Are
you sure you want to add this entry?"
• no: The user will not be prompted
when adding an entry.
• get: Returns the current setting (yes
or no).
3 - 108
Description
Enables or disables the Allow
Dialing option.
User interface screen location:
System > Admin Settings >
General Settings > Home
Screen Settings: Dialing
Display
Enables or disables the User
Settings icon on the System
screen of the user interface,
thus preventing access to the
User Settings screen. This
option is useful to prevent users
from changing the User Settings
functions.
User interface screen location:
System > Admin Settings >
General Settings > Security:
Allow Access to User
Settings
Sets or gets the encryption
mode. Use encryption when the
far site is capable of encryption.
Confirms directory additions.
User interface screen location:
System > Admin Settings >
General Settings > System
Settings > Directory: Confirm
Directory Additions
www.polycom.com/videodocumentation
Example
allowdialing get
allowusersetup
yes
callencryption
required
confirmdiradd yes