Removing Lock Mechanism; Removing Power On Lamp; Removing The Machine Compartment Cover - Electrolux FROST- FREE Service Manual

Table of Contents

Advertisement

Removing Lock Mechanism:

1. Disconnect electrical power from the freezer, remove
the inner lid liner and the lid handle.
2. Remove the spring-loaded metal clip that holds a
lock mechanism to the outer lid liner.
3. Remove the Phillips head screw holding the latch
arm and remove the latch arm.
4. With the latch are removed slide that lock
mechanism up the front of the panel.

Removing Power On Lamp:

1. Disconnect electrical power from the freezer, remove
the inner lid liner and the lid handle.
2. Disconnect the (2) wires from the lamp. Squeeze
the tabs on the side of the lamp housing and push
the housing out through the panel.
Removing the Machine Compartment
Cover:
1. Remove the (2) Phillips head screws holding the cover
to the side of the freezer.
2. Lift up and out on the cover to disengage the (2)
tabs at the bottom of the cover and lift the cover off.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Frost-free

Table of Contents