Removing The Evaporator Fan Assembly; Removing The Evaporator Fan Blade; Removing The Evaporator Fan Mounting Bracket - Electrolux FROST- FREE Service Manual

3. Before refastening the evaporator cover make sure
the wire plug in the bottom of the freezer is in place.
4. Tip the cover forward, and remove the green ground
wire from the freezer liner.

Removing the Evaporator Fan Assembly:

1. Disconnect power from the freezer, remove the
cold control and fan housing cover and release the
top of the evaporator cover.
2. Disconnect the fan assembly wiring harness.
3. Using a 5/16" socket remove the (2) bolts holding
the fan assembly to the fan mounting bracket and
lift the fan assembly out.

Removing the Evaporator Fan Blade:

1. Disconnect power from the freezer and remove the
evaporator fan assembly.
2. Pull the fan blade off with a shaft of the fan.
38