Removing Lid Inner Liner And Seal; Removing Lid Handle - Electrolux FROST- FREE Service Manual

Removing Lid Inner Liner and Seal:

The lid inner liner is held to the lid cover by (36) plastic
rivets and (4) Phillips head screws that are hidden in by
the seal.
1. Disconnect electrical power from the freezer and
raise the lid.
2. Remove the light switch and light socket.
3. Roll the seal back and using a common
screwdriver pop-out the (36) rivets.
4. Remove the (4) Philips head screws holding the
liner to the lid, lift the inner liner off, and carefully lay
liner down on the smooth surface.
5. Remove the seal by starting in the corner and lifting
the seal off.

Removing Lid Handle:

1. Disconnect electrical power from the freezer and
remove the inner lid liner.
2. Pull the insulation back and remove the (2) nuts
holding the handle to the outer liner of the lid.
3. Pull out on the front edge of the handle to disengage
from the locking mechanism and lift to handle off.
32