Select /Switch Off /Switch On; Temperature Selection; Switching Off; Ambient Temperature Function - Electrolux EUFG29800W Instruction Book

Select /Switch off /Switch on

Temperature selection

The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key (B) the current
temperature setting flashes on the
indicator. To confirm the choice of the
temperature press the key (E).
You will hear the buzzer for few
seconds and the indicator displays the
newly selected temperature for a few
seconds, then shows again the inside
compartment temperature.
The newly selected-temperature must
be reached after 24 hours.
After a long period out of use it is not
necessary to set again the temperature
because it remains stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting tempe-
rature. During this time it is possible
that the temperature displayed is
different than the setting temperature.

Switching off

The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.
When the appliance is shut off, the
ambient temperature is shown and the
corresponding icon is lighted.

Ambient Temperature Function

The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corres-
ponding icon appears
In this condition the selected tempera-
ture is the ambient temperature.
You must confirm the choice by
pressing key E within few seconds.
You will hear the buzzer and the icon
remains lighted.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.

Child lock Function

The child lock function is activated by
pressing key D (several times if
necessary) until the corresponding icon
appears .
You must confirm the choice by pres-
sing key E within few seconds. You will
hear the buzzer and the icon remains
lighted.
In this condition any possible operation
through the keys does not cause any
change as long as this function is
activated.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.
.
8