Clearances; Insert Clearances; Mantel Clearances; Hearth Requirements - Monessen Hearth ICFDV30LNTSC Installation And Operating Instructions Manual

Icfdv series direct vent gas fireplace insert
Table of Contents

Advertisement

ICFDV Fireplace Insert

INSeRT CLeARANCeS

No combustibles (ie: drapes, doors) may be within, or swing within 36" of the front of the insert.
Side Wall
10" (254 mm)
Minimum
Figure 3

Mantel Clearances

MANTeL CLeARANCeS
NOTe: The combustible area above the facing must not protrude more than
facing. If it does, it is considered a mantel and must meet the mantel requirements listed
in this manual.

heARTh RequIReMeNTS

The insert must be installed on a noncombustible hearth extending a minimum of 12" from the
fireplace opening (local codes may require a larger hearth). The hearth must also extend to both
sides of the face.
8
12"
(305 mm)
12" (305 mm)
Minimum
42" (1067 mm)
Minimum
FP1947
insert clearances
9/08
12" (305 mm)
Maximum Depth
9"
(228 mm)
3
/4" from the

CLeARANCeS

3/4" (19 mm)
Maximum Depth
Combustible Facing
NOTe: Side clearance
to combustibles is 10"
(254 mm) from opening
whether it is side wall or
mantel legs.
FP2959
20304164

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icfdv30cntsc

Table of Contents