Mitsubishi Electric FR-A8NC Instruction Manual page 41

NOTE
• When Pr.541 = 1(with sign)
• When EEPROM write is specified with the RYE, write mode error (error code H01) will occur.
• When concurrent execution of both RYD and RYE is enabled (when a value other than 0 is set in Pr.544) and both
RYD and RYE are turned on, RYD has precedence.
• When power is turned on (inverter reset), the initial setting status of the sign bit is "positive" and the set frequency is
"0 Hz". (The motor does not operate at the frequency set before turning OFF the power (inverter reset).)
• When set frequency is written with the instruction code of HED and HEE, the sign of the frequency command is not
changed.
• Setting Pr.811 Set resolution switchover ="1 or 11" changes the increment from 1 r/min to 0.1 r/min.
40
INVERTER SETTING