Table of Contents
Advertisement
PIP SETTING
Press the MENU button and highlight the PIP SETTING.
-
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
X- POSITION: adjustment range from 0 to +102 (when MODE SETTING is 1080i)
-
Y- POSITION: adjustment range from +113 to 0 (when MODE SETTING is 1080i)
-
X- POSITION: adjustment range from 0 to +70 (when MODE SETTING is 720p)
-
Y- POSITION: adjustment range from +77 to 0 (when MODE SETTING is 720p)
-
SIZE: adjusts the size of the smaller PIP window using a range from +1 to +97
-
MASTER USER SETTING: When selected, the values for the above are copied from the BASIC profile.
-
If you want to enable the PIP function, you must first press the SET key in the PIP / KEY section of the
SE-2000 keyboard, then press the PIP PVW key and then select the Sub Source channel required for the
PIP window.
The PIP window will appear on the PREVIEW and PROGRAM displays when PiP PVW and PiP PGM
buttons are lit on the SE-2000's Keyboard.
LUMA SETTING
Press the MENU button and highlight the LUMA SETTING option.
-
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
You can set the value for the LUMA LEVEL (0 Black to 255 White)
-
This LUMA LEVEL keys out a grey scale range between 0 and the LUMA LEVEL value set.
-
So LUMA LEVEL 20 would key out a range of Black between 0 and 20 from the Sub source.
-
MASTER USER SETTING: When selected, the value for the above is copied from the BASIC profile.
-
LOGOS
Press the MENU button and highlight the LOGOS option.
-
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
You can select a pre-loaded Logo from the SE-2000's 14 memory slots for Logo1 and Logo2.
-
You can set the on screen positions of Logo1, Logo2 and the Clock.
-
X- POSITION: adjustment range from 0 to +114 (under 1080i)
-
Y- POSITION: adjustment range from +112 to 0 (under 1080i)
-
X- POSITION: adjustment range from 0 to +72 (under 720p)
-
Y- POSITION: adjustment range from +150 to 0 (under 720p)
-
Accepted Logo sizes 256x192 pixels, 512x96 pixels or 128x384 pixels
-
MASTER USER SETTING: When selected, the values for the above are copied from the BASIC profile.
-
Logos need to be loaded into the 14 memory slots in preparation before an event – See Storing
New Logos (Page 21).
16
Advertisement
Table of Contents
