SECTION 7—SEAT
Seat Hinge
DETAIL "A"
Locknut
105°
110°
100°
95°
Shoulder
Bolt
FIGURE 7.2 Adjusting the Back Angle - Fold Down Back Angle
Adjusting the Headrest (Semi-Recline Only)
NOTE: For this procedure, refer to FIGURE 7.3.
1. To raise the headrest, lift the headrest up to the desired position.
2. To lower the headrest, push the release tab towards the front of the wheelchair. Lower
the headrest to the desired position.
Headrest
Release Tab
Headrest
Tube
FIGURE 7.3 Adjusting the Headrest (Semi-Recline Only)
41
Part No 1125085
Pronto® M51™and M61™with SureStep®