Invacare Wheelchair Pronto M61 Operating And Maintenance Manual page 32

SECTION 5—WHEELCHAIR OPERATION
NOTE: For this procedure, refer to FIGURE 5.5 on page 32.
NOTE: This procedure applies to M61 wheelchairs only.
1. Make sure the wheelchair is on a level surface.
2. Press the mode button to switch from driving mode to elevate mode.
NOTE: The LED will light up with a circle around it.
3. Move the joystick:
• Forward ‐ Elevates the seat.
• Backward ‐ Lowers the seat.
Pronto® M51™and M61™with SureStep®
Elevated
Seat
FIGURE 5.5 Elevating the Seat
32
Selected
Drive
Mode
Joystick
Part No 1125085
Mode
Button
Elevate
the Seat
Lower
the Seat