Invacare Wheelchair Pronto M61 Operating And Maintenance Manual page 27

DISPLAY
Information
Gauge
Display
Service Indicator Light Diagnostics
NUMBER
ERROR CODE
OF
DESCRIPTION
FLASHES
1
2
3 Left Motor Fault
4 Right Motor Fault
5 Left Park Brake Fault
6 Right Park Brake Fault
7
8 Controller Fault
9 Communications Fault
10
11 Incompatible or incorrect
Part No 1125085
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
DESCRIPTION
Left RED LED is flashing.
Left to Right "chase" alter-
nating with steady display.
All LEDs are flashing slowly. Joystick has detected Out-
User Fault Release joystick to neutral and try again.
Battery Fault Charge the batteries.
Check that battery cables are connected properly.
If necessary, replace batteries.
Contact Invacare/Dealer for service.
Contact Invacare/Dealer for service.
Contact Invacare/Dealer for service.
Contact Invacare/Dealer for service.
Remote Fault Check to make sure joystick is connected properly.
Contact Invacare/Dealer for service.
Contact Invacare/Dealer for service.
Contact Invacare/Dealer for service.
General Fault Contact Invacare/Dealer for service.
Wrong type of remote connected. Contact Invacare/Dealer
Remote for service.
DEFINITION
Battery charge is low.
Joystick is in program-
ming, inhibit and/or charg-
ing mode.
of-Neutral-at-Power-Up
mode.
POSSIBLE SOLUTION
27
Pronto® M51™and M61™with SureStep®
COMMENTS
The batteries should be
charged as soon as possi-
ble.
The steady LEDs indicate
the current state of the
battery charge.
Release the joystick back
to Neutral.