Table of Contents
Advertisement
3.2
Advanced copy functions
3.2.5
Specifying the scan size
Dark shadows are created around the document by copying with the cover open or when copying books and
magazines. These shadows can be erased when copying.
d
When you scan using the document glass, only an area from the reference setting position equal to the set
scan size is scanned.
When you scan using the ADF, only an area from the center with a width equal to the set scan size is scanned.
The whole length of the document is scanned.
1
Load the document, and press <Copy>.
2
Press [Advanced].
3
Press [Doc.Size].
% If you loaded the document in the ADF, [Auto] is selected.
4
Select the size of the document to scan, and press [Enter].
5
Press [Close].
6
If you select a size that is not loaded for the scan size in step
4, select the cassette or the bypass tray containing the paper
you want to use for copying.
% When the scan size and the loaded paper match, this step
is not required.
7
Press <Start>.
Konica Minolta 240f
3
3-13
Advertisement
Table of Contents
